Photorealistic render of the finished den with the vertical king Murphy bed closed in warm white slab-front style with natural maple trim and brushed brass hardware
The finished room with the bed folded up. AI-generated rendering based on the Murphy Bed Plans design.

Why this room works.

This 13 by 12 foot den treats a king bed like furniture instead of an apology. The vertical king folds into a single slab front cabinet 82 inches wide and 87 inches high, holding a 76 by 80 inch mattress on a vertical king hardware kit that runs about $269, and when the bed is up the den keeps its full floor for reading, homework, or an evening with friends.

Warm white paint covers the slab front, natural maple trim frames the edges, and brushed brass hardware gives the plain wall a finished look without any ornament to dust. Lower the bed and the dashed outline on the plan reaches about 87 inches from the back wall, leaving roughly 57 inches at the foot, so there is room to walk around the bed and change the sheets without squeezing past the wall.

The floor plan.

Drag along the wall to move the Murphy bed156″MURPHY BED WALL · 1Murphy bed wall · enter a measured length144″WALL 2Wall 2 · enter a measured length156″WALL 3Wall 3 · enter a measured length144″WALL 4Wall 4 · enter a measured lengthDoorway 1door 36″ · unconfirmedWindow 1window 48″ · unconfirmed156 sq ft
The built-in sits on the 13-foot wall. The dashed outline extends about 87 inches from the back wall, leaving roughly 57 inches at the foot of the bed. The built-ins are finished in warm white, natural maple, and brushed brass. The 82-inch modern cabinet leaves the rest of the den open when the bed is up. 13 x 12 ft room with a 9 ft ceiling.

The bed.

Size
King (76 x 80 in mattress)
Orientation
Vertical
Configuration
Bed cabinet only
Face style
Slab-front, warm white paint with natural maple trim and brushed brass hardware
Cabinet dimensions
82 in wide x 87 in high x 20 in deep, before projecting hardware and desktop
Hardware kit
Vertical King hardware kit, about $269

Edit this design

See it in 3D.

Photorealistic render of the same den with the vertical king Murphy bed lowered and white linen bedding
3D builder view of the Crisp Modern King Vertical Den Wall with the king vertical Murphy bed closed, warm white, natural maple and brushed brass finishes
The 3D builder view of this room, with the bed closed. This is the design the renders are based on.

Before and after.

Photorealistic render of the same den with the vertical king Murphy bed lowered and white linen bedding
Photorealistic render of the empty 13-by-12-foot den with bare walls and light wood flooring
BeforeAfter
Drag to compare the empty room with the finished den and the bed lowered. The AI-generated renders show the room from the same viewpoint.

From this room to your build.

Every room in the gallery follows the same path: explore it free, refine it with AI for your space, then build it with the full plans. Here is what each step unlocks.

1 FREE

Add to my designs

Open this exact room in the 3D designer. Orbit around it, change the dimensions, try your own room size. Save one design with a free account. Complete your profile to unlock two more design slots.

Open in the 3D designer

2 $5 PER DESIGN

AI-assisted design

Map your actual room in floor plan mode: walls, doors, windows, ceiling height. Then explore a decorated 3D view and refine the design with AI chat and renderings tuned to your space.

Start AI-assisted design

3 $100 PER DESIGN

Full build plan

Get a project guide with reference dimensions, a materials checklist, and an assembly sequence. The $5 AI-assisted design step is required. Use your kit manual for verified cut dimensions, drilling, and installation.

Get the plans

Shop this room.

These accessories suit the Warm white, Natural maple, and Brushed brass finishes. Prices are estimates while we curate product links.

Affiliate disclosure: product links on this page are Amazon affiliate links. As an Amazon Associate, we earn from qualifying purchases at no extra cost to you.

Ready to try this layout?

Open it in the designer